Description
Heavy Duty Latch Option 1
- Bolt-type tongue provides positive locking action.
- Proven, heavy-duty construction outlasts similar latches in hard commercial use.
- Padlocking provision standard on all models.
- Accepts inside release lever to prevent accidental entrapment in locked walk-ins. Inside lever releases cylinder-locked or padlocked door.
- Unsurpassed for long life and reliability.
SPECIFICATIONS:
MATERIAL: High pressure die-cast zinc body and strike housing, 300 series stainless steel handle.
FINISH: Polished Chrome
MOUNTING: Holes drilled and countersunk for 1/4″ (6.0mm) screws. (screws are not included)
Certifications: NSF
Heavy Duty Latch Option 2
- Super heavy duty construction and large body profile designed to withstand the most rigorous of commercial kitchen or cold room enivornments.
- Tamper Proof Design – bolt cannot be retracted from the outside when latch is cylinder locked or padlocked.
- With the safety inside release mechanism, occupants can safely exit even if latch is locked or padlocked.
- Friction free operation provided by utilizing roller bolt retraction combined with roller strike action.
- Eliminates wear and allows doors to close smoothly and easily without slamming, while offering superb gasket compression.
- Easy Lift Handle – user friendly requires minimal hand pressure to completely retract bolt from strike.
- Low 1 1/2″ (38mm) handle rise eliminates tugging and wrist twisting.
SPECIFICATIONS
MATERIAL: Solid forged brass, inner working parts and back plate are solid stainless steel.
FINISH: Polished Chrome
MOUNTING: Holes drilled and countersunk for 1/4″ (6.0mm) screws. (screws are not included)
Certifications: NSF
Heavy Duty Rolling Strike
- Adjustable strike assures precise adjustment.
- Unsurpassed for long life and reliability.
- Nylon roller standard
SPECIFICATIONS
MATERIAL: Option 1: High pressure die-cast zinc strike housing. Option 2: Reinforced die cast Zamak; inner working parts and back plate are stainless steel.
FINISH: Polished Chrome
MOUNTING: Holes drilled and countersunk for 1/4″ (6.0mm) screws.
Certifications: NSF
Glow-in-the-dark push knob
- 4″ or 6″ inside release.
- Always visible. 9/16″ (14.3 mm) thick stainless steel rod.
SPECIFICATIONS
MATERIAL: Steel rod and flange, Safety-Glow plastic knob.
MOUNTING: Holes drilled for No. 10 (5.0 mm) screws.
Certifications: NSF
Warning: California’s Prop 65
There are no reviews yet.