Scratch and Dent Kason 1248 Spring Loaded Hinge – Flush


The KASON 1248 BRUSHED CHROME SPRING-LOADED HINGE, FLUSH, 1 CT, WITH HARDWARE KIT is a high-performance hinge for heavy walk-in cooler and freezer doors. It features a spring mechanism that adds extra closing force to overcome air resistance and a special high-lift cam system that outperforms similar spring hinges.

  • Special high-lift cam system outperforms similar spring hinges.
  • Flush mount model for doors that are even with door frame.
  • Cam-rise action reduces gasket wear, even with irregular floors.
  • Built-in dwell holds door open when beyond 135°. Will self-close if less than 135.
  • Simple manual operation reverses hinges for use on right- or left opening door.

1248 Hinge Installation Instructions PDF

Out of stock


ReFridge stocks the highest-quality replacement parts for your walk-in cooler and freezer. Owned and operated fully in the United States, ReFridge has approximately 40 years of experience in the walk-in cooler and freezer industry. The team at ReFridge is committed to selling top-of-the-line replacement parts and providing the highest level of customer service.

We are an authorized reseller of genuine OEM parts such as Kason®, Component Hardware® and Miljoco®, to name a few. We provide walk-in hardware, gaskets, heater wire, light fixtures, and refrigeration parts for all brands of walk-in coolers and freezers.

If you can’t find the part you are looking for, contact us and we can special order your items for drop-ship. ReFridge by Walk-in Cooler Parts provides an experienced team of walk-in experts to answer any questions you may have about the parts you are ordering.

ReFridge has recently re-branded our Amazon store from our original Walk-in Cooler Parts brand in order to more actively protect the listings and products that we sell through Trademarks and Amazon Branding protections. With the re-brand, our listings are “new”, but our quality and service are not. We have been actively selling on Amazon for over ten years and have the excellent customer service to prove it. Try us today!

WICP - Scratch and Dent (Blurb)


How to determine offset

Hinge Reversal Instructions 1. Lift strap from flange and remove pin assembly. 2. Pop out cap. Turn strap 180 degrees, reinsert pin assembly. 3. Reposition strap into flange and replace cap.

Warning: California’s Prop 65

*Photo may not be representative of actual blemishes. All parts are fully functional and in acceptable condition. If you have any questions or concerns, please feel free to contact us at or at 866-261-2797.

Additional information

Weight 2.5 lbs
Dimensions 10 × 8 × 4 in

There are no reviews yet.

Be the first to review “Scratch and Dent Kason 1248 Spring Loaded Hinge – Flush”